The Automizer™ Right Hand

The Automizer™ Right-Hand side loader features a strong, light-weight body with a reliable loading arm that can reach farther than any other automated side loader.

Parked cars and other obstacles are no longer an obstacle with an arm that can reach 12-feet and lift up to 1,000 pounds fully extended.
Thanks to carefully engineered hydraulics, this arm maneuvers both smoothly and with exacting precision.

Labrie Automizer Right-Hand

Having a smooth operating arm is significantly important when maneuvering in tight spaces; our arm is the smoothest operating arm in the industry today due to its low "mass-in-motion" and "under hopper" inline design. This arm is easy to operate with an electric over hydraulic joystick control; and the Zero-Grab low swing out makes collection in narrow spaces a breeze!



    Automizer™ Right-Hand 



    20yd³ (20+0) 22yd³ (20+2) 24yd³ (20+4) 27yd³ (27+0) 29yd³ (27+2) 31yd³ (27+4) 33yd³ (27+6) 31yd³ (31+0) 33yd³ (31+2) 35yd³ (31+4) 37yd³ (31+6)
    Overall Length, Tailgate Closed (in.) 244 250 263 284 290 303 318 314 320 333 348
    Overall Width (in.) 102 102 102 102 102 102 102 102 102 102 102
    Overall Height Above Frame, Tailgate Closed (in.) 103 103 103 103 103 103 103 103 103 103 103
    Overall Length, Tailgate Open (in.) 294 294 294 334 334 334 334 364 364 364 364
    Overall Height Above Frame, Tailgate Open (in.) 197 197 197 197 197 197 197 197 197 197 197
    Overall Length, Dumping Position (in.) 408 408 408 447 447 447 447 474 474 474 474


    Body Floor 0.157" AR450 175,000psi
    Body Sides (lower) 10ga A1011 80,000psi
    Body Roof 12ga A1011 80,000psi
    Tailgate 12ga A1011 80,000psi


    Hopper Size (yd³) 6.5
    Hopper Floor 1/4" AR450 175,000psi
    Hopper Sides (lower) 1/4" AR450 175,000psi


    Arm Lift Capacity 1,000 lbs
    Arm Reach 144"
    Swing out 36"
    Arm Controls Proportional joystick, electric over hydraulic


    Compaction ratio (lbs/yd³ ) 850 (650 on single axle chassis)
    Packer Panel Face Plate 1/4" 100QT 100,000psi
    Packer Width 65"
    Packer Height 24"
    Packer Stroke 52"


    Pump Make & Model Dual Vane
    Pump Capacity BODY: 20.4 gpm@700 rpm; ARM: 16.3 gpm@700 rpm
    Max. Operating Pressure 3,000 psi (2,000 psi on single axle chassis)
    Oil Reservoir (cab over) 85 gal


    Body Lifting Cylinder (20yd³ bodies) 4 stages 6-1/16" bore x 150" stroke
    Body Lifting Cylinder (27-31yd³ bodies) 4 stages 6-1/16" bore x 180" stroke
    Packer Cylinders 4" bore x 2-1/2" rod x 40" stroke
    Tailgate Cylinders 2-1/2" bore x 1-3/4" rod x 39" stroke
    Arm Extension Cylinders 1-1/2" bore x 1" rod x 54" stroke
    Lifting Cylinder 3" bore x 1-1/2" rod x 16" stroke
    Grabber Cylinders 1-1/2" bore x 1" rod x 4-15/16" stroke


     Note: Specifications subject to changes without notice






    CNG Ready since 2001

    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.




    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck


    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload


    CNG Ready Trucks







    Brochure & Media

    Automizer™ Right-Hand


    For more information on the Automizer Right Hand



    Adobe PDF Specifications Sheet
    Adobe PDF CNG Specifications

    Dealers & Demos

    Call us for more info


    Dealers in the US

    Distributors in the US

    In Canada

    Distributors in Canada


    International Distributor;

    General Sales & Demos

    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos


Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information